kurokoNightly - Possible fixes to KaitoianOS Kuroko

hosts/kurokoNightly/configuration.nix

@@ -0,0 +1,203 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+{
+  config,
+  pkgs,
+  ...
+}:
+{
+  imports = [
+    # Include the results of the hardware scan.
+    ./hardware-configuration.nix
+  ];
+  # System Services/Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+  networking.hostName = "kuroko"; # Define your hostname.
+  services.ratbagd.enable = true;
+  hardware.pulseaudio.support32Bit = true;
+
+  #Nvidia Hardware begins
+  services.xserver.videoDrivers = [
+    "nouveau"
+    "amdgpu"
+  ];
+  hardware.graphics.enable = true;
+  hardware.graphics.enable32Bit = true;
+
+  hardware.nvidia = {
+
+    # Modesetting is required.
+    modesetting.enable = true;
+
+    # Nvidia power management. Experimental, and can cause sleep/suspend to fail.
+    # Enable this if you have graphical corruption issues or application crashes after waking
+    # up from sleep. This fixes it by saving the entire VRAM memory to /tmp/ instead
+    # of just the bare essentials.
+    powerManagement.enable = false;
+
+    # Fine-grained power management. Turns off GPU when not in use.
+    # Experimental and only works on modern Nvidia GPUs (Turing or newer).
+    powerManagement.finegrained = false;
+
+    # Use the NVidia open source kernel module (not to be confused with the
+    # independent third-party "nouveau" open source driver).
+    # Support is limited to the Turing and later architectures. Full list of
+    # supported GPUs is at:
+    # https://github.com/NVIDIA/open-gpu-kernel-modules#compatible-gpus
+    # Only available from driver 515.43.04+
+    # Currently alpha-quality/buggy, so false is currently the recommended setting.
+    open = true;
+
+    # Enable the Nvidia settings menu,
+    # accessible via `nvidia-settings`.
+    nvidiaSettings = true;
+
+    # Optionally, you may need to select the appropriate driver version for your specific GPU.
+    package = config.boot.kernelPackages.nvidiaPackages.beta;
+    #Power Saving Features
+    prime = {
+      offload = {
+        enable = true;
+        enableOffloadCmd = true;
+      };
+      # Make sure to use the correct Bus ID values for your system!
+      #intelBusId = "PCI:";
+      nvidiaBusId = "PCI:01:0:0";
+      amdgpuBusId = "PCI:08:00:00";
+    };
+
+  };
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+  security.polkit.enable = true;
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "America/Los_Angeles";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_US.UTF-8";
+    LC_IDENTIFICATION = "en_US.UTF-8";
+    LC_MEASUREMENT = "en_US.UTF-8";
+    LC_MONETARY = "en_US.UTF-8";
+    LC_NAME = "en_US.UTF-8";
+    LC_NUMERIC = "en_US.UTF-8";
+    LC_PAPER = "en_US.UTF-8";
+    LC_TELEPHONE = "en_US.UTF-8";
+    LC_TIME = "en_US.UTF-8";
+  };
+
+  #System specific packages
+  environment.systemPackages = with pkgs; [
+    #nvtop
+    osu-lazer
+    davinci-resolve
+    wacomtablet
+    obs-studio
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  services.fprintd = {
+    enable = true;
+    #package = pkgs.fprintd-tod;
+    #tod = {
+    # enable = false;
+    # driver = pkgs.libfprint-2-tod1-elan;
+    #};
+  };
+  # List services that you want to enable:
+
+  # Keyboard related modifications
+  services.keyd = {
+    enable = true;
+    keyboards.default = {
+      ids = [ "*" ];
+      settings = {
+        main = {
+          capslock = "esc";
+          leftalt = "leftcontrol";
+          leftcontrol = "leftalt";
+          y = "z";
+          z = "y";
+        };
+      };
+    };
+  };
+  services.actkbd = {
+    enable = true;
+    bindings = [
+      {
+        keys = [ 233 ];
+        events = [ "key" ];
+        command = "brightnessctl -d amdgpu_bl2 set +10%";
+      }
+      {
+        keys = [ 232 ];
+        events = [ "key" ];
+        command = "brightnessctl -d amdgpu_bl2 set 10%-";
+      }
+      {
+        keys = [ 121 ];
+        events = [ "key" ];
+        command = "pamixer -t";
+      }
+      {
+        keys = [ 122 ];
+        events = [ "key" ];
+        command = "pamixer -i 5";
+      }
+      {
+        keys = [ 123 ];
+        events = [ "key" ];
+        command = "pamixer -d 5";
+      }
+      {
+        keys = [ 237 ];
+        events = [ "key" ];
+        command = "brightnessctl -d asus::kbd_backlight set 1-";
+      }
+      {
+        keys = [ 238 ];
+        events = [ "key" ];
+        command = "brightnessctl -d asus::kbd_backlight set +1";
+      }
+      #{ keys = [  ]; events = [ "key" ]; command = "brightnessctl -d amdgpu_bl2 set +10%"; }
+      #{ keys = [  ]; events = [ "key" ]; command = "brightnessctl -d amdgpu_bl2 set +10%"; }
+
+    ];
+  };
+
+  # Laptop Power services
+  services.tlp = {
+    enable = true;
+    settings = {
+      #Optional helps save long term battery health
+      START_CHARGE_THRESH_BAT0 = 20; # 40 and bellow it starts to charge
+      STOP_CHARGE_THRESH_BAT0 = 98; # 80 and above it stops charging
+
+    };
+  };
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "24.11"; # Did you read the comment?
+}